Online Catalog
Introduction
1.Product Catalog:IDEAL TAPE is mainly engaged in five series of products, which are Inner Tape, Outer Tape, Joint Tape, Tape Primer, and Putty Tape with 10-odd categories in nearly 100 specifications. They can be used for the purposes of steel pipe surface corrosion resistance for various pipelines in facility projects of petroleum, petrochemical industry, city gas, oil and gas storage and transportation, power, water supply, metallurgy, civil aviation, etc.
1.1 Inner tape:
(Anticorrosion tape, Anti corrosion tape, Anticorrosive tape) is used for anticorrosion of underground, underwater, & overhead pipelines.
1.2 Outer tape:
(Protection Tape, Protective Tape) is used for protection of pipe and the surface of Inner Tape from damages.
1.3 Joint tape:
(Polyethylene PE Tape, Butyl Rubber Tape) is used for anticorrosion of field joints, fittings, & specifically piping.
Component: backing: Polyethylene PE & adhesive: butyl rubber
Thickness: 0.38mm to 1.27mm,
Width: 50mm to 300mm
Length: 30 to 300m
1.4 Tape Primer:
(Synthetic Primer) complementary product covers of the rusting steel pipe and enable to enhance the adhesive to the pipe since it is working with the adhesive of the polyethylene tape.
P19: Solid content 19%;
P27: Solid content 27%.
1.5 Putty Tape:
(Putty Filler, Mastic Tape) complementary product fills of joints / weld bead & have capability to smooth the surface of the pipe.
N99: Solid content.
2.Characteristic::
2.1 Naming Ningbo Ideal Anticorrosion Tape:
2.2. Tape Consumption Sheet:
2.2.1. Manual Wrapping Tape Consumption Sheet
2.2.2. Manual and Mechanical Wrapping Tape Consumption Sheet
3.Application:
3.1 Steps of Construction:
3.1.1 Rust Removal / Clean Pipe --> 3.1.2 Priming --> 3.1.3 Wrapping Inner Tape (Anti corrosion Tape) --> 3.1.4 Wrapping Outer Tape (Protection Tape) --> 3.1.5 Spark Leakage Detecting --> 3.1.6 Peel Strength Test
3.2 Usage of The Tape:
3.2.1. Tape Automatic Wrapping
3.2.2. Tape Mechanical Wrapping
3.2.3. Tape Manual and Simple Mechanical Wrapping
3.2.4. Tape Manual and Mechanical Wrapping
3.2.5. Tape Manual Wrapping
; win.focus();)
Title: 2.2.2. Manual and Mechanical Wrapping Tape Consumption Sheet
Introduction:Evaluating and estimating the total amount of NBIdeal tape for Manual and Mechanical Wrapping in term of how many rolls of the tape, how much liters of primer, width of the tape and overlaping of the tape.
Introduction:Evaluating and estimating the total amount of NBIdeal tape for Manual and Mechanical Wrapping in term of how many rolls of the tape, how much liters of primer, width of the tape and overlaping of the tape.
; win.focus();)
Title: 2.2.1. Manual Wrapping Tape Consumption Sheet
Introduction:Evaluating and estimating the total amount of NBIdeal tape for the Manual Wrapping in term of how many rolls of the tape, how much liters of primer, width of the tape and overlaping of the tape.
Introduction:Evaluating and estimating the total amount of NBIdeal tape for the Manual Wrapping in term of how many rolls of the tape, how much liters of primer, width of the tape and overlaping of the tape.
; win.focus();)
Title: 1.1. Inner Tape (Anti corrosion Tape)
Introduction:System Description:
The T-100 series is cold applied tape coating systems for the anticorrosion of underground, underwater, and overhead pipelines. The Adhesive is a key in ground performance characteristic coupled with the low and high density polyethylene backing. This kind of tape can be applied by hand or with a wrapping machine.
T-100 Inner Tape series Coating Systems with AWWA C-214 Standard
Type of the tape: T-140 T-150 T-165 T-180 T-1100 T-1130
Thickness:
(ASTM D 1000)
Total mm mil mm mil mm mil mm mil mm mil mm mil
0.38 15 0.51 20 0.64 25 0.76 30 1.02 40 1.27 50
Film 0.25 10 0.30 12 0.33 13 0.38 15 0.51 20 0.64 25
Adhesive 0.13 5 0.21 8 0.31 12 0.38 15 0.51 20 0.63 25
Tensile: 27 lbs/in 31 lbs/in 34 lbs/in 39 lbs/in 53 lbs/in 66 lbs/in
Length: 60 Meter 50 Meter 40 Meter 30 Meter 25 Meter 20 Meter
Width: 2, 3, 4, 6, 9,12 inch
Colour: Black
Elongation: 300 percent
Peel Adhesion to Prime Pipe:
(ASTM D 1000) 165 oz/in, 18N/10mm
Cathodic Disbandment: (ASTM G8) 0.25 in radius 6.4 mm
Water Vapor Transmission Rate:
(ASTM F1249) 0.2g/100in2 /24h, 0.3mg/cm2/24h
Water Absorption: (ASTM D570) Less than 0.1
Volume Resistively: (ASTM E257) 2.5 X 1012 ohm-m
Dielectric Strength: (ASTM D 149) 40 KV
Temperature Range:
(Normal in Ground Service) -30 to 160F, -34 to 71C
Introduction:System Description:
The T-100 series is cold applied tape coating systems for the anticorrosion of underground, underwater, and overhead pipelines. The Adhesive is a key in ground performance characteristic coupled with the low and high density polyethylene backing. This kind of tape can be applied by hand or with a wrapping machine.
T-100 Inner Tape series Coating Systems with AWWA C-214 Standard
Type of the tape: T-140 T-150 T-165 T-180 T-1100 T-1130
Thickness:
(ASTM D 1000)
Total mm mil mm mil mm mil mm mil mm mil mm mil
0.38 15 0.51 20 0.64 25 0.76 30 1.02 40 1.27 50
Film 0.25 10 0.30 12 0.33 13 0.38 15 0.51 20 0.64 25
Adhesive 0.13 5 0.21 8 0.31 12 0.38 15 0.51 20 0.63 25
Tensile: 27 lbs/in 31 lbs/in 34 lbs/in 39 lbs/in 53 lbs/in 66 lbs/in
Length: 60 Meter 50 Meter 40 Meter 30 Meter 25 Meter 20 Meter
Width: 2, 3, 4, 6, 9,12 inch
Colour: Black
Elongation: 300 percent
Peel Adhesion to Prime Pipe:
(ASTM D 1000) 165 oz/in, 18N/10mm
Cathodic Disbandment: (ASTM G8) 0.25 in radius 6.4 mm
Water Vapor Transmission Rate:
(ASTM F1249) 0.2g/100in2 /24h, 0.3mg/cm2/24h
Water Absorption: (ASTM D570) Less than 0.1
Volume Resistively: (ASTM E257) 2.5 X 1012 ohm-m
Dielectric Strength: (ASTM D 149) 40 KV
Temperature Range:
(Normal in Ground Service) -30 to 160F, -34 to 71C
; win.focus();)
Title: 1.2. Outer Tape (Protection Tape, Protective Tape)
Introduction:System Description:
The T-200 series is cold applied tape coating systems for Protection of the pipe and its T-100 Series surface from damages. The Adhesive is a key in ground performance characteristic coupled with the low and high density polyethylene backing. This kind of tape can be applied by hand or with a wrapping machine.
T-200 Outer Tape series Coating Systems with AWWA C-214 Standard
Type of the tape: T-240 T-250 T-265 T-280 T-2100 T-2130
Thickness:
(ASTM D 1000)
Total mm mil mm mil mm mil mm mil mm mil mm mil
0.38 15 0.51 20 0.64 25 0.76 30 1.02 40 1.27 50
Film 0.28 11 0.38 15 0.51 20 0.63 25 0.64 25 0.76 30
Adhesive 0.10 4 0.13 5 0.13 5 0.13 5 0.38 15 0.51 20
Tensile: 29 lbs/in 39 lbs/in 39 lbs/in 53 lbs/in 66 lbs/in 78 lbs/in
Length: 60 Meter 50 Meter 40 Meter 30 Meter 25 Meter 20 Meter
Width: 2, 3, 4, 6, 9,12 Inch
Colour: Black, White, Red, Blue, Purple, etc.
Elongation: 300 percent
Adhesion to Inner Layer T-100
(ASTM D 1000) 46 oz/in, 5N/10mm
Cathodic Disbandment: (ASTM G8) 0.25 in radius 6.4 mm
Water Vapor Transmission Rate:
(ASTM F1249) 0.2g/100in2 /24h, 0.3mg/cm2/24h
Water Absorption: (ASTM D570) Less Than 0.1
Volume Resistively: (ASTM E257) 2.5 X 1012 ohm-m
Dielectric Strength: (ASTM D 149) 40 KV
Temperature Range:
(Normal in Ground Service) -30 to 160 F, -34 to 71C
Introduction:System Description:
The T-200 series is cold applied tape coating systems for Protection of the pipe and its T-100 Series surface from damages. The Adhesive is a key in ground performance characteristic coupled with the low and high density polyethylene backing. This kind of tape can be applied by hand or with a wrapping machine.
T-200 Outer Tape series Coating Systems with AWWA C-214 Standard
Type of the tape: T-240 T-250 T-265 T-280 T-2100 T-2130
Thickness:
(ASTM D 1000)
Total mm mil mm mil mm mil mm mil mm mil mm mil
0.38 15 0.51 20 0.64 25 0.76 30 1.02 40 1.27 50
Film 0.28 11 0.38 15 0.51 20 0.63 25 0.64 25 0.76 30
Adhesive 0.10 4 0.13 5 0.13 5 0.13 5 0.38 15 0.51 20
Tensile: 29 lbs/in 39 lbs/in 39 lbs/in 53 lbs/in 66 lbs/in 78 lbs/in
Length: 60 Meter 50 Meter 40 Meter 30 Meter 25 Meter 20 Meter
Width: 2, 3, 4, 6, 9,12 Inch
Colour: Black, White, Red, Blue, Purple, etc.
Elongation: 300 percent
Adhesion to Inner Layer T-100
(ASTM D 1000) 46 oz/in, 5N/10mm
Cathodic Disbandment: (ASTM G8) 0.25 in radius 6.4 mm
Water Vapor Transmission Rate:
(ASTM F1249) 0.2g/100in2 /24h, 0.3mg/cm2/24h
Water Absorption: (ASTM D570) Less Than 0.1
Volume Resistively: (ASTM E257) 2.5 X 1012 ohm-m
Dielectric Strength: (ASTM D 149) 40 KV
Temperature Range:
(Normal in Ground Service) -30 to 160 F, -34 to 71C
; win.focus();)
Title: 3.1.6. Peel Strength Test
Introduction:Peel Strength Test: gash in parallel with tape ring on the top that is 10mm in width and more than 100mm in length until the surface of steel pipe. then, pull the spring balance at an angle of 90 degrees with pipe surface at the speed of less 300mm per min. this test shall be carried out at least 4 hours later after wrapping the tape.
Introduction:Peel Strength Test: gash in parallel with tape ring on the top that is 10mm in width and more than 100mm in length until the surface of steel pipe. then, pull the spring balance at an angle of 90 degrees with pipe surface at the speed of less 300mm per min. this test shall be carried out at least 4 hours later after wrapping the tape.
; win.focus();)
Title: 1.3. Joint Tape (Polyethylene Tape, PE Tape, Butyl Rubber Tape)
Introduction:System Description:
The T-300 series is cold applied tape coating systems for anticorrosion of field joints, fittings, and specifically piping. The Adhesive is a key in ground performance characteristic coupled with the low and high density polyethylene backing. This kind of tape can be applied by hand or with a wrapping machine.
T-300 Joint Tape Series Coating Systems with AWWA C-214 Standard:
Type of the tape T-365 T-380 T-3100 T-3130
Thickness
(ASTM D 1000) mm mil mm mil mm mil mm mil
0.64 25 0.76 30 1.02 40 1.27 50
Tensile: 31 lbs/in 31 lbs/in 41 lbs/in 52 lbs/in
Length: 40 Meter 30 Meter 25 Meter 20 Meter
Width: 2, 3, 4, 6, 9,12 inch
Colour: Black, White, Red, Blue, Purple, etc.
Elongation: 300 Percent
Peel Adhesion to Prime Pipe:
(ASTM D 1000) 230 oz/in, 25N/10mm
Cathodic Disbandment: (ASTM G8) 0.25 in radius 6.4 mm
Water Vapor Transmission Rate:
(ASTM F1249) 0.2g/100in2 /24h, 0.3mg/cm2/24h
Water Absorption: (ASTM D570) Less Than 0.1
Volume Resistively: (ASTM E257) 2.5 X 1012 ohm-m
Dielectric Strength: (ASTM D 149) 40 KV
Temperature Range:
(Normal in Ground Service) -30 to 160F, -34 to 71C
Introduction:System Description:
The T-300 series is cold applied tape coating systems for anticorrosion of field joints, fittings, and specifically piping. The Adhesive is a key in ground performance characteristic coupled with the low and high density polyethylene backing. This kind of tape can be applied by hand or with a wrapping machine.
T-300 Joint Tape Series Coating Systems with AWWA C-214 Standard:
Type of the tape T-365 T-380 T-3100 T-3130
Thickness
(ASTM D 1000) mm mil mm mil mm mil mm mil
0.64 25 0.76 30 1.02 40 1.27 50
Tensile: 31 lbs/in 31 lbs/in 41 lbs/in 52 lbs/in
Length: 40 Meter 30 Meter 25 Meter 20 Meter
Width: 2, 3, 4, 6, 9,12 inch
Colour: Black, White, Red, Blue, Purple, etc.
Elongation: 300 Percent
Peel Adhesion to Prime Pipe:
(ASTM D 1000) 230 oz/in, 25N/10mm
Cathodic Disbandment: (ASTM G8) 0.25 in radius 6.4 mm
Water Vapor Transmission Rate:
(ASTM F1249) 0.2g/100in2 /24h, 0.3mg/cm2/24h
Water Absorption: (ASTM D570) Less Than 0.1
Volume Resistively: (ASTM E257) 2.5 X 1012 ohm-m
Dielectric Strength: (ASTM D 149) 40 KV
Temperature Range:
(Normal in Ground Service) -30 to 160F, -34 to 71C
; win.focus();)
Title: 3.1.3. Wrapping Inner Tape (Anti corrosion Tape)
Introduction:Wrapping Inner Tape firstly, and then Wrapping Outer Tape.
The Steel pipe that is painted with primer is wrapping with tape by means of suitable can be 10 to 20 N/cm. The overlapped length between beginning and end of the tape shall be no less than 1/4 circumference of the steel pipe and teh total length of the tape shall be no less than 100mm each film shall be paralleled and must not be twisted and rumpled.
Introduction:Wrapping Inner Tape firstly, and then Wrapping Outer Tape.
The Steel pipe that is painted with primer is wrapping with tape by means of suitable can be 10 to 20 N/cm. The overlapped length between beginning and end of the tape shall be no less than 1/4 circumference of the steel pipe and teh total length of the tape shall be no less than 100mm each film shall be paralleled and must not be twisted and rumpled.
; win.focus();)
Title: 2.1. Naming Ningbo Ideal Anti corrosion Tape
Introduction:Use polyethylene and butyl rubber as main material. excellent corrosion resistance and low water Absorption
Wide Range of operation temperature from 34C to 71C, 130F to 160F
Ningbo Ideal Anti corrosion Systems is a multi-layer system wich is composed of inner anti corrosion tape and outer protection tape resistant to outside mechanic impact with high anti corrosion performance and impact resistance.
With a long life of over 30 years
Widely applied to pipes whose sleeve diameters are from 50mm to 1800mm convenient construction, safe and ,clean operation, suitable to factory production and field construction under normal temperatures.
Low cost
Introduction:Use polyethylene and butyl rubber as main material. excellent corrosion resistance and low water Absorption
Wide Range of operation temperature from 34C to 71C, 130F to 160F
Ningbo Ideal Anti corrosion Systems is a multi-layer system wich is composed of inner anti corrosion tape and outer protection tape resistant to outside mechanic impact with high anti corrosion performance and impact resistance.
With a long life of over 30 years
Widely applied to pipes whose sleeve diameters are from 50mm to 1800mm convenient construction, safe and ,clean operation, suitable to factory production and field construction under normal temperatures.
Low cost
; win.focus();)
Title: 3.1.2. Priming
Introduction:Primer shall be stirred well before painting. A even film of primer is painted on the steel surface that is rust-removed completely and dust-free. after the primer dries up (one may feel no sticky), the steel pipe can be wrapping with tape ( it usually takes 3 to 5 minutes). the primer dosage usually amounts to 80 to 100g/m2.
Introduction:Primer shall be stirred well before painting. A even film of primer is painted on the steel surface that is rust-removed completely and dust-free. after the primer dries up (one may feel no sticky), the steel pipe can be wrapping with tape ( it usually takes 3 to 5 minutes). the primer dosage usually amounts to 80 to 100g/m2.
; win.focus();)
Title: 1.4. Tape Primer & 1.5. Putty Tape
Introduction:System Description:
The P-00 series (Anticorrosion Primer Series) and N-99 (Molding Putty Series) are complementary goods, one is covering of the rusting steel pipe, and the other is filling of the weld bead
P-00 series enable to enhance the adhesive to the pipe since it is working with the adhesive of the polyethylene tape, and N-99 series have capability to smooth the surface of the pipe. Moreover, both series can be applied by hand.
P-00 Series Coating Systems AWWA C-214 Standard:
Type of the Primer P-19 P-27
Base Rubber and Synthetic Resins Rubber and Synthetic Resins
Solid Content 19percent 27percent
Colour Black Black
Weight / Liter 0.79 KG 0.81 Kg
Flash Point +10F to +50 F to -12C to + 10C +10F to +50 F to -12C to + 10C
Viscosity ( Time for flow 4mm nozzle over) 10 to 20 Second 15 to 30 Second
N-99 series Coating Systems with AWWA C-214 Standard:
Type of the Molding Putty Tape N-99
Base Butyl Rubber, Tackifier resin, Antioxidant
Solid Content 99 Percent
Colour Black
Density 1.59
Thickness: 3mm
Width: 2, 3, 4, 6, 9,12 Inch
Length: 7 to 8 Meter
Introduction:System Description:
The P-00 series (Anticorrosion Primer Series) and N-99 (Molding Putty Series) are complementary goods, one is covering of the rusting steel pipe, and the other is filling of the weld bead
P-00 series enable to enhance the adhesive to the pipe since it is working with the adhesive of the polyethylene tape, and N-99 series have capability to smooth the surface of the pipe. Moreover, both series can be applied by hand.
P-00 Series Coating Systems AWWA C-214 Standard:
Type of the Primer P-19 P-27
Base Rubber and Synthetic Resins Rubber and Synthetic Resins
Solid Content 19percent 27percent
Colour Black Black
Weight / Liter 0.79 KG 0.81 Kg
Flash Point +10F to +50 F to -12C to + 10C +10F to +50 F to -12C to + 10C
Viscosity ( Time for flow 4mm nozzle over) 10 to 20 Second 15 to 30 Second
N-99 series Coating Systems with AWWA C-214 Standard:
Type of the Molding Putty Tape N-99
Base Butyl Rubber, Tackifier resin, Antioxidant
Solid Content 99 Percent
Colour Black
Density 1.59
Thickness: 3mm
Width: 2, 3, 4, 6, 9,12 Inch
Length: 7 to 8 Meter
; win.focus();)
Title: 3.1.1. Clean Pipe / Rust Removal
Introduction:Steel Surface need treating. its quality shall reach Sa2 or St3 grade as prescribed in GB8923-88 pre-paint steel surface rust grade and rust removal grade, and it shall be dust-free.
Introduction:Steel Surface need treating. its quality shall reach Sa2 or St3 grade as prescribed in GB8923-88 pre-paint steel surface rust grade and rust removal grade, and it shall be dust-free.
; win.focus();)
Title: 3.1.4. Wrapping Outer Tape (Protection Tape)
Introduction:Wrapping Outer Tape before Wrapping Inner tape smoothly and completely .
The Steel pipe that is painted with primer is wrapping with tape by means of suitable can be 10 to 20 N/cm. The overlapped length between beginning and end of the tape shall be no less than 1/4 circumference of the steel pipe and teh total length of the tape shall be no less than 100mm each film shall be paralleled and must not be twisted and rumpled.
Introduction:Wrapping Outer Tape before Wrapping Inner tape smoothly and completely .
The Steel pipe that is painted with primer is wrapping with tape by means of suitable can be 10 to 20 N/cm. The overlapped length between beginning and end of the tape shall be no less than 1/4 circumference of the steel pipe and teh total length of the tape shall be no less than 100mm each film shall be paralleled and must not be twisted and rumpled.
; win.focus();)
Title: 3.2.3. Tape Manual and Simple Mechanical Wrapping
Introduction:Manual easy mechanical wrapping: place two tips of steel pipe on the rolling bearing rack in flexible rotation; one worker crank the steel pipe in rotation undergoes artifical rust removal and primer removal, another holds the tape device with the tape in cooperation with rolling speed, pull the tape device advancing and rolling which parallels the steel pipe axis in accordance with joint requiremnents.
Introduction:Manual easy mechanical wrapping: place two tips of steel pipe on the rolling bearing rack in flexible rotation; one worker crank the steel pipe in rotation undergoes artifical rust removal and primer removal, another holds the tape device with the tape in cooperation with rolling speed, pull the tape device advancing and rolling which parallels the steel pipe axis in accordance with joint requiremnents.
; win.focus();)
Title: 3.2.1. Tape Automatic Wrapping
Introduction:Automated assembly line for tape wrapping; place the steel pipe on several pairs of drivers which make an angle with it. The steel pipe advances while rotating with fast joints connecting and disconnecting. There is no steel wheel for rust-removal, or rust removal by impeller head, priming, rolling devices (scroll rack, rubber passive riding wheel). The manipulator for loading and unloading is enquipped. after the process of winding the tape in the automated assembly line for tape wrapping, the steel pipe will be anti corrosive completely.
Introduction:Automated assembly line for tape wrapping; place the steel pipe on several pairs of drivers which make an angle with it. The steel pipe advances while rotating with fast joints connecting and disconnecting. There is no steel wheel for rust-removal, or rust removal by impeller head, priming, rolling devices (scroll rack, rubber passive riding wheel). The manipulator for loading and unloading is enquipped. after the process of winding the tape in the automated assembly line for tape wrapping, the steel pipe will be anti corrosive completely.
; win.focus();)
Title: 3.2.2. Tape Mechical Wrapping
Introduction:Set the steel pipe on rubber wheel that is driven by an electro-motor through a decelerator in rotation. The steel pipe in rotation undergoes artificial rust-removal, and rolling brush priming; then put the tape in rolling device of rolling cart or dolly (without tenslator); wind the tape while adjusting the cart speed in accordance with the joint requirement.
Introduction:Set the steel pipe on rubber wheel that is driven by an electro-motor through a decelerator in rotation. The steel pipe in rotation undergoes artificial rust-removal, and rolling brush priming; then put the tape in rolling device of rolling cart or dolly (without tenslator); wind the tape while adjusting the cart speed in accordance with the joint requirement.
; win.focus();)
Title: 3.2.4. Tape Manual and Mechanical Wrapping
Introduction:Have the steel pipe fixed in the air or placed on the spot of line pipe; remove rust by manual steel wire brush and then prime; clamp the manual winding machine on the steel pipe, adjust the angle of pinch roller according to the joint requirements, place the tape in scroll device ( without tenslator) and wind the aid handle outside of rolling machine.
Introduction:Have the steel pipe fixed in the air or placed on the spot of line pipe; remove rust by manual steel wire brush and then prime; clamp the manual winding machine on the steel pipe, adjust the angle of pinch roller according to the joint requirements, place the tape in scroll device ( without tenslator) and wind the aid handle outside of rolling machine.
; win.focus();)
Title: 3.2.5. Tape Manual Wrapping
Introduction:have the steel pipe placed well, use steel wire brush to remove rust and primed, and wind up holding and transmitting and the tape tight.
Introduction:have the steel pipe placed well, use steel wire brush to remove rust and primed, and wind up holding and transmitting and the tape tight.
Didn't find what you're looking for? Post a buying lead.
Company Info
NingBo Ideal Anticorrosion Material Co., Ltd.
[China]
[Verified Member]
Online Postings: Products, Selling Leads
Business Type:Manufacturer
City: Cixi
Province/State: Zhejiang
Country/Region : China